QNAP QXP-10G2U3A USB 3.2 expansion card with brackets
QNAP QXP-10G2U3A USB 3.2 expansion card

QNAP QXP-10G2U3A USB 3.2 Gen 2 Expansion Card

$128.00 inc. GST

Up to 10Gbps Speeds for Fast File Transfer and Storage Expansion

Available on back-order

SKU: QXP-10G2U3A Category:

Description

QNAP QXP-10G2U3A USB 3.2 Gen 2 Expansion Card

The QNAP QXP-10G2U3A USB 3.2 Gen 2 Expansion Card provides speeds of up to 10Gbps – double that of USB 3.2 Gen 1 – to greatly boost data transfer speeds. With two ports, the QNAP USB 3.2 Gen 2 Expansion Card provides compatibility with newer, faster USB 3.2 Gen 2 devices to accelerate file transfers and backup. The QNAP USB 3.2 Gen 2 Expansion Card can be installed in either a QNAP NAS or Windows®/Ubuntu® PC.

  • Dual-port USB 3.2 Gen 2 Type-A connectivity. Both ports provide up to 10 Gbps data transfer speeds and are backwards compatible with previous-generation USB devices.

  • Supports USB Attached SCSI Protocol (UASP) to provide convenient fast file sharing and intensive data transfer.

  • Uses advanced low-power processes, following standard PCIe/USB bus Power Management to reduce power consumption.

  • Supports overcurrent detection and short circuit protection.

  • Supports Windows 8.x / 10 (32/64-bit) and Ubuntu desktop 20.04 LTS. No driver is required.

  • Works great with the TL-D800C and TL-R1200C storage enclosures

Experience USB 3.2 Gen 2 SuperSpeed+ up to 10Gbps

The QNAP USB 3.2 Gen 2 Expansion Card provides speeds of up to 10Gbps – double that of USB 3.2 Gen 1, and 20 times that of USB 2.0.

Expand your Storage by Connecting to a QNAP USB JBOD

By using a QNAP QXP-10G2U3A USB 3.2 Gen 2 Expansion Card in your QNAP NAS or PC, you can connect a QNAP USB JBOD to back up and expand your storage. The USB 3.2 Gen 2 Expansion Card supports both QNAP NAS and Windows®/Ubuntu® PCs without requiring drivers. You can configure RAID and monitor disk health using the QTS/QuTS hero Storage & Snapshots Manager on a QNAP NAS, or by using the QNAP JBOD Manager utility on your computer.

Learn More: TL USB JBOD

Specifications

USB 3.2 Gen 2 dual-port PCIe expansion card
Connectors: 2 x USB Type-A
USB Host Controller: ASMedia ASM3142
PCIe and Lanes: PCIe Gen2 x 2
Bracket: Low-profile pre-installed. Low-profile and Full-height are included.
Form factor: Low-profile 89.65 x 68.9 x 14 mm (Without bracket)
Working temperature: 0 ~ 40 ºC (32 ~ 104ºF)
Working humidity: 5 ~ 95% RH
Supported operating systems:

  • QTS 4.3.6 (or later)
  • QuTS hero
  • Windows 8.x/10 (32/64-bit)
  • Ubuntu 20.04 LTS

Package Content: 1 x USB expansion card; 1 x QIG; 2 x Brackets

Please check the compatibility list for your NAS

Reviews

There are no reviews yet.

Be the first to review “QNAP QXP-10G2U3A USB 3.2 Gen 2 Expansion Card”

Related products